ASSA ABLOY Entrance Systems

Besam / ASSA ABLOY swing-door operator control family

Primary identifier: Besam swing-operator control family · Status: active

Identification notes, labels, and verification steps for Besam / ASSA ABLOY swing-door operator control family.

Commonly confused with: Besam UniSlide / sliding-door operator control family
Last reviewed: Aug 15, 2026

Parts & Components

Indexed components for this system. They are identification and search cues — verify revision and configuration before ordering.

No indexed components are published on this record yet.

Identification

Aliases: Besam swing door controller (common_name)
ASSA ABLOY swing operator control (oem)
Besam swing control board (common_name)
R1003532 (revision) — DCUSA 2016 Besam SW100 “CU-ESD CONTROL UNIT.” One swing-generation listing identity — not all Besam swing controls.
R1008346 (revision) — DCUSA 2016 Besam SW200i “CONTROL UNIT W/ EXU BOARDS.” Includes EXU option boards; a listing that omits EXU may be incomplete.
R600085 (revision) — DCUSA 2016 Powerswing CSDA control unit. Powerswing is a named swing line — confirm plates vs SW100/SW200i.
R1004204 (revision) — DCUSA 2016 Powerswing CSDB control unit. Different Powerswing control identity from CSDA R600085.
Besam UniSlide board (mistaken for swing) (mistaken) — Common marketplace error when only Besam branding is photographed.
Labels & connectors to capture: Besam or ASSA ABLOY Entrance Systems branding on enclosure or PCB sticker
Swing-operator or package model references distinct from UniSlide sliding plates (SW100, SW200i, Powerswing, etc.)
Sticker PNs such as R1003532, R1008346, R600085, or R1004204 when present
Motor, safety sensor, and activation harness connectors with generation-specific keying
Revision marks near board edge or major components; EXU / option boards if the donor used them
Common mistaken names: Besam UniSlide / sliding controls sold as swing boards (or the reverse)
Generic “Besam automatic door parts” without swing vs sliding context

Revision notesShow

Swing-operator control generations under Besam / ASSA ABLOY branding are not a single interchangeable PCB set. Aftermarket catalogs list SW100 CU-ESD (R1003532), SW200i with EXU boards (R1008346), and Powerswing CSDA/CSDB (R600085 / R1004204) as separate control identities. Photograph every mark and compare to the removed assembly before assuming fitment.

Compatibility

Commercial swing automatic entrances in Besam / ASSA ABLOY Entrance Systems swing-operator packages. Not a substitute identification path for UniSlide sliding families — confirm operator type plates and control labels together.

Voltage: Package-specific. Use on-unit labeling and official product documentation for the exact control identity; do not assume a shared voltage class with UniSlide from photos alone.

Besam / ASSA ABLOY swing-operator packages (matching generation)

Compatible with caveats

Relevant when labels and harnesses match the removed swing control. Sliding UniSlide packages require their own matched control.

Public Besam / ASSA ABLOY Entrance Systems product-line separation between swing and sliding packages; exact PN/revision matching is still required on the unit.

Besam UniSlide sliding packages

Not compatible

Do not assume a swing Besam control will operate a UniSlide sliding package based on brand alone.

Public product-line distinction between UniSlide sliding and swing-operator families; treat as incompatible without OEM documentation for that exact control identity.

Equipment / package	Status	Notes	Source / provenance
Besam / ASSA ABLOY swing-operator packages (matching generation)	Compatible with caveats	Relevant when labels and harnesses match the removed swing control. Sliding UniSlide packages require their own matched control.	Public Besam / ASSA ABLOY Entrance Systems product-line separation between swing and sliding packages; exact PN/revision matching is still required on the unit.
Besam UniSlide sliding packages	Not compatible	Do not assume a swing Besam control will operate a UniSlide sliding package based on brand alone.	Public product-line distinction between UniSlide sliding and swing-operator families; treat as incompatible without OEM documentation for that exact control identity.

Related systems & parts

Curated cross-links for identification context — not automatic compatibility claims.

Buying & Selling

No verified sold-comparable range published yet

Condition and value notesShow

Used — untested
Interest tracks readable swing-family identification. Vague Besam branding without swing/sliding context reduces serious buyer response.
Qualitative resale guidance; no invented dollar comps.
Used — tested
Donor-tested claims should name the swing package context and what functions were checked; otherwise treat closer to unknown used.
Qualitative guidance pending sold-comp curation.
Rebuilt / refurbished
Rebuild listings need who performed the work and what was replaced; otherwise discount the rebuild claim.
Process guidance for evaluating rebuilt listings; prices not asserted.

Marketplace / supplier links

Search marketplaces for Besam swing operator control
Filter carefully — many hits are UniSlide or unrelated Besam parts.

Seller guidanceShow

Photograph

Donor operator plate showing swing package identity
Control sticker and silkscreen revision marks
Full connector edge with keying visible
Enclosure condition and any option modules

Disclose

Swing family context (not UniSlide) and any readable PN/revision
Tested vs untested status
Missing cables, covers, or modules

Title tips

Besam / ASSA ABLOY + swing operator control + sticker text (SW100 R1003532, SW200i R1008346, Powerswing R600085/R1004204 if that is the unit)
Explicitly avoid UniSlide in the title unless the donor plate says UniSlide

Buyer guidanceShow

Common mistakes

Purchasing a UniSlide sliding control for a swing Besam opening
Trusting a title that only says Besam without operator-type evidence

Revision differences

Swing control revisions often differ in connector count and option cards — demand side-by-side photos with your removed board

Verify before purchase

Swing (not UniSlide) evidence in photos or seller notes
Readable OEM sticker text
Connector keying match to your board
Return window for wrong family/revision

Used vs rebuilt: what buyers should verify

Sources & Field Notes

Last reviewed 2026-08-15. Claims on this page are curated field/resale intelligence. We link official public pages only and do not host copyrighted manuals.

Sources & provenanceShow

ASSA ABLOY Entrance Systems — official site — ASSA ABLOY Entrance Systems (official public page) · type: manufacturer_page

Curated field notesShow

Besam swing-operator controls share brand recognition with UniSlide sliding packages, which is exactly why surplus channels mis-title them. A listing that only says “Besam board” or “ASSA ABLOY door computer” fails both swing and sliding buyers. This family page focuses on reading swing-package cues, capturing full sticker text, and treating UniSlide lookalikes as a different purchase until proven otherwise. No affiliation with the manufacturer is claimed; official public product pages are linked for brand context only.

This is not a repair procedure and not manufacturer-authorized service documentation.

Request part ID · Parts directory · Control & Motor Reference · Voltage Drop